Mercury UPS 650va

• 650VA Capacity
• Lightning and surge protection
•  Short circuit and overload protection
• Energy-saving function
• Line Interactive design
• Long-Lasting

Technical Specifications

• Input voltage 220VAC
• Input frequency 50Hz
• Input phase Single phase
• Input socket With Fuse
• Cold Start (0 to 100% load) Press the ON/OFF switch
• Input range (220V) 140V-300V
• Rating output (VA). 650VA
• Rating output (W). 390W
• Rating output (W). Battery mode(simulated sine wave),
• AC mode (sine wave)
• Power factor 0.6
• Rating voltage 220V
• Output range 220Vac-7%+15% ( in battery mode )
• Rear Output Socket 2xUniversal – Battery backup
• Transfer time TYPICAL 4-8 ms
• Communication Interface NIL
• Rating frequency 50Hz
• Output Frequency Line-mode Synchronize with the Utility
• Battery mode 50 Hz±1Hz
• Output Frequency Line Mode Synchronize with the utility
• Short Circuit Protection Line Mode FUSE & firmware protection
• Battery Mode Software protection controlled by firmware
• Overload Protection Line Mode 110%+-5% (Go to fault mode after 5 minutes)
• 120%+-5% (Go to fault mode immediately)
• Battery Mode 110%+-5% (Shutdown after 5 minutes)
• 120%+-5% (Shut down immediately)
• Rating frequency 12V/8.2AH 1x Backup Time – Typical 10mins to 18mins (depending on load)

• Charge Current About 1A at normal mode
• Over Charge Protection >14.5V +/- 0.2V stop charging
• Weight 5.6kg +/- 0.3Kg
• Dimension 390x 145 x 220 (mm)